Hospilieum NW

21/07/20

Comment

minh.nguyen@gianguyenjsc.com.vn

Speciﬁcation	overall thickness 2.0mm	widthm×length 1820mm×9m
	others Antibacterial & Antivirus Finished / Highly Durable UV-Coated Surface
JIS Registered No.	NO.GB0507188 (JIS A 5705 Vinyl Sheet Flooring)

Packing	9m/roll
Net Weight	27.6kg/roll
Performance	Wear Resistance	(EN649) Group T
Recommended Adhesive from TOLI	dried mortar and concrete	Eco Royal Cement, Eco AR600
	heavy trafﬁc use	Epo Gray S, US Cement
	The wards and living rooms where beds with double-row casters are used	Epo Gray ST, US Cement, US Cement (less-smelly), US200
	humid mortar and concrete	Epo Gray ST, US Cement, US Cement (less-smelly), US200
	TOLI UNDERLAY SHEET	US Cement, US Cement (less-smelly), US200
Welding/Seam Finish	Welding rod for heat-welding (antibacterial ﬁnished) is available on a color-by-color basis. JOINT SHIELD method (JS Method) by TOLI JOINT SHIELD is also applicable.
Notes on Installation	Seams should be heat-welded or ﬁnished with TOLI JOINT SHIELD. TOLI JOINT SHIELD can also work on the top of TOLI UNDERLAY SHEET, but when partial weight will be put on the ﬂoor (such as heavy stuff or casters), the seam joints should not be ﬁnished with TOLI JOINT SHIELD. When you install 2 different sheets, each edge should be jointed at the seam. (Do not cut in the middle of the sheet.) For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided. Please do not use the urethane adhesive other than US Cement, US Cement (less-smelly), US200. As the sub-ﬂoor material, the underlayment like TOLI UNDERLAY SHEET (page 298) is also workable. Apply the same adhe- sive for both upside and downside of the underlayment. Please note that the durability to dynamic load will be degraded when you install with the underlayment. When you install HOSPILEUM NW in the places where rollaway beds are used (e.g. a patient room of the hospital, a living room of the welfare facility and so forth), the epoxy adhesive such as TOLI Epo Gray ST or TOLI Epo Gray S and urethane adhesive such as US Cement, US Cement (less-smelly), US200 should be used even if the humidity of the sub-ﬂoor is less than 8%.
Recommended Way of Maintenance from TOLI	No need to apply the maintenance wax on the surface. Clean the ﬂoor every day with an auto scrubber or a wet rag wrung out tightly. Use the detergent for ﬁxed contamination. Even if the wax is applied on the surface, it does not affect the quality of NW series. For a large facility, an abstergent auto scrubber is more recommendable. High speed bufﬁng should be avoided. Otherwise highly durable UV coating will be abraded.
Others	At the entrance of the building, the dust control mat should be laid in order to avoid soils and sands from outside. To prepare the ﬂoor which is durable to rolling loads, please fully check the combination of HOSPILEUM NW and the sub-ﬂoor, the adhesive, and the loads. For instance, when the sub-ﬂoor is too weak, HOSPILEUM NW might be destroyed from underneath. Please be aware that some rubber casters might cause color-contamination. Please note that the product has the indigenous odor from its materials.

Specication

overall thickness 2.0mm

widthm×length 1820mm×9m

others Antibacterial & Antivirus Finished / Highly Durable UV-Coated Surface

JIS Registered No.

NO.GB0507188 (JIS A 5705 Vinyl Sheet Flooring)

Packing	9m/roll
Net Weight	27.6kg/roll
Performance	Wear Resistance	(EN649) Group T
Recommended Adhesive from TOLI	See page 276.
Welding/Seam Finish	See page 276.
Notes on Installation	See page 276.
Recommended Way of Maintenance from TOLI	See page 276.
Others	See page 276.